Affri

  • Rockwell Hardness Tester RSDMAG
It's only fair to share...Share on LinkedInTweet about this on Twitter

A real standardized hardness tester conform to the norms ASTM and ISO E-18, ASMT E-10 and ISO 6508, ISO 6506 with a magnatic clamping system for portability. Pulling one single start lever the result will appear in few seconds. It can be used by any operator without any particular preparation:

1. Identify the test area and place the hardness tester on the test sample

2. Locking the magnetic lever the tester will strongly adhere to the test piece and remain clamped for the entire test cycle

3. Sliding 50 mm the indenter take contact with different surfaces or misaligned surfaces

4. Start the test and in 4 seconds the result will appear on the display scale or deal gauge

It's only fair to share...Share on LinkedInTweet about this on Twitter

Download PDF Brochures

RSDMag Brochure download

Hardness Conversion Info download

Specification:

Accuracy Better than 0.5 %
Temperature Range From 10 °C to 35 °C
Data Output RS 232 C (USB as option)
Power Supply 6 V + Charger
Principle of Operation Dynamometric load cell
Preload 29.42 N (3 kgf) OR 98.07 N (10 kgf)
Force Range RSD MAG D2

Rockwell 588.4 – 980.7 – 1471 N (60 – 100 – 150 kgf)

Brinell 98.07 – 612.9 – 1226 – 1839 N (at request 2452 N)

(10 – 62.5 – 125 – 187.5 kgf (at request 250 kgf)

Vickers 98.07 – 980.7 N(10 – 100 kgf)

RSD MAG D4

Rockwell 147.1 – 294.2 – 441.3 N (15 – 30 – 45 kgf)

Brinell 153.2 – 294.2 – 306.5 N (15.625 – 30 – 31.25 N)

Vickers 29.42 – 294.2 N (3 – 30 kgf)

Feasible Tests Rockwell HRC A – D – B – F – G – L – M – R

Brinell HB 30 – HB 10 – HB 5 – HB 2.5 MPa (F/D2)

Vickers 10 – 100

Superficial Rockwell HRN – HRT

Brinell HB 30 – HB 5 – HB 2.5 MPa (F/D2)

Vickers 3 – 30

Standards ISO 6506 / ISO 6508 / ASTM E-18 / ASTM E-10 / ASTM E103
Indenter Stroke 50 mm / 2”
Magnetic Support 100 x 50 mm (standard)
Fields Of Use For tube, profile, valves, massive or small size metals
Weight 35 kg
Dimension 50 x 40 x 60 cm